Forged Bar Manufacturer Chat   Steel Bar India, Flat Steel Exporter
Forging Bar Supplier, Forging Ring ExporterForging Steel WholesalerSteel Forgings Exporter
FORGED BARS
We offer a comprehensive range of Stainless Steel Forging Bar, fabricated from finest quality raw materials such as Stainless Steel, Duplex Stainless Steel, Nickel-Based Alloys, Alloy Steel and Titanium. Our forging bars are available in different shapes and dimensions under various forms like forging bar/flat bar, forged circle/blanks/discs, forged rings/blocks/cylinder and forging step downs. Acknowledged world over for its quality finish, durability and high tensile strength, these bars are extensively used in various industries like Power Generation, Aerospace, Pumps, Valves, Food and Special Machinery. We provide these products with Destructive Testing, Heat Treating, Non Destructive Testings.

Stainless Steel Forging Bar


Forging Ring Exporter, Ring Forging SupplierSagar steels has four hydraulic open die presses, one hydraulic upset press, four ring mills, and one bar planishing mill produce parts that weigh from 5 lbs. To 80,000 lbs. In stainless, nickel, and other ferrous and non-ferrous materials. Shapes that are readily forged include bars (round, square, flat or hex), blanks, rings, hubs, stepdown shafts, hollows, and unusual, contoured shapes achieved by torch cutting and other secondary processing.

Services : forging , destructive testing, heat treating, non destructive testing
Materials: stainless steel, duplex stainless steel, nickel-based alloys, alloy steel and titanium
Industries served : power generation, aerospace, pumps, valves, food, special machinery

Grades stainless steel forgings :
303, 304, 309, 310, 316, 317, 321, 330, 333, 347, 403, 405, 409, 410, 416, 418, 420, 422, 430, 431, 440, 254 smo, duplex 2205, duplex 2507, nitronic ferralium 255, alloy 20, 17-4 ph, 13-8 mo, 15-5ph

Nickel alloys/high temperature alloy forgings :
l605, nickel 200 & 201, 400, k500, 600, 601, 625, 706, 718, x750, 800, 825, 900, 901, 903, 907, 909, haynes 188, a286, hastelloy b, c, s and x, 904l, al6xn, c276, c22, haynes 120

Alloy steel forgings : 
4130, 4140, 4142, 4145, 4150, 4320, 4330, 4340, 4350, 4620, 4820, 6150, 8620, 8630, 8822, 9310, 52100, hy80, hy100, 9315, 300m, nitralloy 135m, 17-22a

Titanium forgings : 
6al4v, commercially pure, grade 2, grade 7 and grade 12



Forging Steel Wholesaler
Stainless Steel Forged Flat Bar


Our sharp cornered forged flats do not require torch/flame cutting. Any thickness within our capabilities can be produced on one of our three steam driven hammers, our capabilities are as follows:-

•1" square up to 24" wide 2500 lbs max
•lengths up to 120"
•no minimum requirement

Materials: Stainless Steel, Duplex Stainless Steel, Nickel-Based Alloys, Copper Alloy, Alloy Steel , Aluminum and Titanium
Industries Served : Power Generation, Aerospace, Pumps, Valves, Food, Special Machinery

Grades Stainless Steel Forgings :
303, 304, 309, 310, 316, 317, 321, 330, 333, 347, 403, 405, 409, 410, 416, 418, 420, 422, 430, 431, 440, 254 SMO, Duplex 2205, Duplex 2507, Nitronic Ferralium 255, Alloy 20, 17-4 PH, 13-8 MO, 15-5PH

Nickel Alloys/High Temperature Alloy Forgings :
L605, Nickel 200 & 201, 400, K500, 600, 601, 625, 706, 718, X750, 800, 825, 900, 901, 903, 907, 909, Haynes 188, A286, Hastelloy B, C, S and X, 904L, AL6XN, C276, C22, Haynes 120

Alloy Steel Forgings : 
4130, 4140, 4142, 4145, 4150, 4320, 4330, 4340, 4350, 4620, 4820, 6150, 8620, 8630, 8822, 9310, 52100, HY80, HY100, 9315, 300M, Nitralloy 135M, 17-22A

Titanium Forgings : 
6AL4V, Commercially Pure, Grade 2, Grade 7 and Grade 12



Forging Steel Wholesaler
Stainless Steel Forged Circle / Blanks / Discs

Individually forged disc offer greater strength due to refinement of grains in the forging process. Our capabilities for individually forged discs are:

•3" DIA up to 38" DIA 1500 lbs max
•Individually forged no torch cut on OD
•½" to 12" in thickness
•no minimum requirement

Services : Forging , Machining , Finishing, Destructive Testing, Heat Treating, Non Destructive Testing
Materials: Stainless Steel, Duplex Stainless Steel, Nickel-Based Alloys, Copper Alloy, Alloy Steel , Aluminum and Titanium
Industries Served : Power Generation, Aerospace, Pumps, Valves, Food, Special Machinery

Grades Stainless Steel Forgings :
303, 304, 309, 310, 316, 317, 321, 330, 333, 347, 403, 405, 409, 410, 416, 418, 420, 422, 430, 431, 440, 254 SMO, Duplex 2205, Duplex 2507, Nitronic Ferralium 255, Alloy 20, 17-4 PH, 13-8 MO, 15-5PH

Nickel Alloys/High Temperature Alloy Forgings :
L605, Nickel 200 & 201, 400, K500, 600, 601, 625, 706, 718, X750, 800, 825, 900, 901, 903, 907, 909, Haynes 188, A286, Hastelloy B, C, S and X, 904L, AL6XN, C276, C22, Haynes 120

Alloy Steel Forgings : 
4130, 4140, 4142, 4145, 4150, 4320, 4330, 4340, 4350, 4620, 4820, 6150, 8620, 8630, 8822, 9310, 52100, HY80, HY100, 9315, 300M, Nitralloy 135M, 17-22A

Titanium Forgings : 
6AL4V, Commercially Pure, Grade 2, Grade 7 and Grade 12



Forged Bar Manufacturer, Flat Steel ExporterStainless Steel 410 Forged Ring


Forged Rings
Seamless rolled rings on one of our radial ring rollers, offer improved concentricity and smooth surfaces as compared to plate burn-outs, or butt welded rings. Rolled rings save material machining rings from bar stock by not having to bore out the inner diameter. Our CNC programmed machines ensure repeatability from ring to ring, with close tolerance rolling to minimize machining off excess metal. We have the capability of rolling rings up to 72” in diameter and up to 30” in thickness or height, 10,000# max.

Forged and rolled rings offer controlled grain flow, which gives strength and resistance to impact and fatigue as compared to plate and welded materials. sagar steels offers the best lead-time in the industry, some alloys ban be shipped within days!

Our modern equipment alow us the flexability to produce rings in a variety of grades and configurations. Our capabilities are:

•3" OD up to 48" OD Up to 900 lbs max
•Ring segments
•Contours or specials available
•No minimum requirement

Services : Forging , Destructive Testing, Heat Treating, Non Destructive Testing
Materials: Stainless Steel, Duplex Stainless Steel, Nickel-Based Alloys, Copper Alloy, Alloy Steel , Aluminum and Titanium
Industries Served : Power Generation, Aerospace, Pumps, Valves, Food, Special Machinery

Grades Stainless Steel Forgings :
303, 304, 309, 310, 316, 317, 321, 330, 333, 347, 403, 405, 409, 410, 416, 418, 420, 422, 430, 431, 440, 254 SMO, Duplex 2205, Duplex 2507, Nitronic Ferralium 255, Alloy 20, 17-4 PH, 13-8 MO, 15-5PH

Nickel Alloys/High Temperature Alloy Forgings :
L605, Nickel 200 & 201, 400, K500, 600, 601, 625, 706, 718, X750, 800, 825, 900, 901, 903, 907, 909, Haynes 188, A286, Hastelloy B, C, S and X, 904L, AL6XN, C276, C22, Haynes 120

Alloy Steel Forgings : 
4130, 4140, 4142, 4145, 4150, 4320, 4330, 4340, 4350, 4620, 4820, 6150, 8620, 8630, 8822, 9310, 52100, HY80, HY100, 9315, 300M, Nitralloy 135M, 17-22A

Titanium Forgings : 
6AL4V, Commercially Pure, Grade 2, Grade 7 and Grade 12



Steel Forgings Exporter, Forging Steel WholesalerStainless Steel 410 Forged Block


Forged Blocks
Individually forged blocks from sagar steel offer better strength due to forging in all six directions, further refining the grain structure. This forging process yields greater impact and direction strength compared to plate or bar.

Sagar steels can produce blocks Up to 48" cross section, 15,000# max. Short lead-time, no minimum requirements custom sizes can be produced on short runs.

Forged blocks do not require torch/flame cutting. Sharp corners, refined grains limitless cross sectional options available.

•Up to 24" cross section1500 lbs max
•Improved strength
•no minimum requirement

Services : Forging , Destructive Testing, Heat Treating, Non Destructive Testing
Materials: Stainless Steel, Duplex Stainless Steel, Nickel-Based Alloys, Alloy Steel and Titanium
Industries Served : Power Generation, Aerospace, Pumps, Valves, Food, Special Machinery

Grades Stainless Steel Forgings :
202,304, 309, 310, 316, 317, 321, 330, 333, 347, 403, 405, 409, 410, 416, 418, 420, 422, 430, 431, 440, 254 SMO, Duplex 2205, Duplex 2507, Nitronic Ferralium 255, Alloy 20, 17-4 PH, 13-8 MO, 15-5PH

Nickel Alloys/High Temperature Alloy Forgings :
L605, Nickel 200 & 201, 400, K500, 600, 601, 625, 706, 718, X750, 800, 825, 900, 901, 903, 907, 909, Haynes 188, A286, Hastelloy B, C, S and X, 904L, AL6XN, C276, C22, Haynes 120

Alloy Steel Forgings :
 4130, 4140, 4142, 4145, 4150, 4320, 4330, 4340, 4350, 4620, 4820, 6150, 8620, 8630, 8822, 9310, 52100, HY80, HY100, 9315, 300M, Nitralloy 135M, 17-22A

Titanium Forgings : 
6AL4V, Commercially Pure, Grade 2, Grade 7 and Grade 12



Ring Forging Supplier, Steel Forgings Exporter
Stainless Steel 410 Forged Cylinder


Forged Round Bars
Round Bars machined or as forged, sagar steels has the bar for you. 1½" up to 36" diameter 20,000# max. No minimum requirement, custom sizes available.
Short runs are our specialty; we have the capability to produce sound center bars up to 240" long. As forged surface, rough machined, even ground bars can be produced in a short time.

Forged rounds available in any diameter within our capabilities. Forged bars offer refined grains and improved strength.
•1" DIA up to 56" DIA 2500 lbs max
•Lengths up to 120"
•No minimum requirement

Services :Forging , Destructive Testing, Heat Treating, Non Destructive Testing
Materials: Stainless Steel, Duplex Stainless Steel, Nickel-Based Alloys, Alloy Steel and Titanium
Industries Served : Power Generation, Aerospace, Pumps, Valves, Food, Special Machinery

Grades Stainless Steel Forgings
303, 304, 309, 310, 316, 317, 321, 330, 333, 347, 403, 405, 409, 410, 416, 418, 420, 422, 430, 431, 440, 254 SMO, Duplex 2205, Duplex 2507, Nitronic Ferralium 255, Alloy 20, 17-4 PH, 13-8 MO, 15-5PH

Nickel Alloys/High Temperature Alloy Forgings :
L605, Nickel 200 & 201, 400, K500, 600, 601, 625, 706, 718, X750, 800, 825, 900, 901, 903, 907, 909, Haynes 188, A286, Hastelloy B, C, S and X, 904L, AL6XN, C276, C22, Haynes 120

Alloy Steel Forgings : 
4130, 4140, 4142, 4145, 4150, 4320, 4330, 4340, 4350, 4620, 4820, 6150, 8620, 8630, 8822, 9310, 52100, HY80, HY100, 9315, 300M, Nitralloy 135M, 17-22A

Titanium Forgings : 
6AL4V, Commercially Pure, Grade 2, Grade 7 and Grade 12



Stainless Steel 410 Forging Step Downs
Stainless Steel 410 Forging Step Downs


Our forging experts are capable of producing special shapes, send us your drawing.

•size and weight upon application
•no tooling charge
•save time on machining from solid bar
•no minimum requirement

Services : forging , machining , destructive testing, heat treating, non destructive testing
Materials: stainless steel, duplex stainless steel, nickel-based alloys, alloy steel  and titanium
Industries served : power generation, aerospace, pumps, valves, food, special machinery

Grades Stainless steel forgings : 
304, 309, 310, 316, 317, 321, 330, 333, 347, 403, 405, 409, 410, 416, 418, 420, 422, 430, 431, 440, 254 smo, duplex 2205, duplex 2507, nitronic ferralium 255, alloy 20, 17-4 ph, 13-8 mo, 15-5ph

Nickel alloys/high temperature alloy forgings :
l605, nickel 200 & 201, 400, k500, 600, 601, 625, 706, 718, x750, 800, 825, 900, 901, 903, 907, 909, haynes 188, a286, hastelloy b, c, s and x, 904l, al6xn, c276, c22, haynes 120

Alloy steel forgings :
4130, 4140, 4142, 4145, 4150, 4320, 4330, 4340, 4350, 4620, 4820, 6150, 8620, 8630, 8822, 9310, 52100, hy80, hy100, 9315, 300m, nitralloy 135m, 17-22a

Titanium forgings : 
6al4v, commercially pure, grade 2, grade 7 and grade 12



Forged Bar Manufacturer, Steel Forgings Exporter
Stainless Steel 410 Rolled Flat

We manufacture stocks stainless rolled and flat bar in 410  hot finished. We also stock 420 in cold finished rolled flat bars. All stainless rolled flat bars are stocked in standard 12’ random length sections. Penn Stainless will also process all stainless rolled flat bar. Our saw cutting capabilities enable our customers to receive the parts needed to start production. We can also polished stainless rolled flat bars per your specifications. Other grades and non standard sizes can be supplied upon

Stainless grades :
202, 303, 304, 304L, 309, 310, 316, 316L, 321, 410, 416, 420, 430, 430F, 431, 15-5 PH, 17-4 PH, 13-8 MO PH.

Chemical / ultrasonic Test Certificate